![](/images/new-backgrounds/1328420/3284207x1.webp)
SYMBOLS
The label on your tool may include the following symbols. The symbols and their definitions are as follows:
V | volts | A | amperes | ||||||
Hz | hertz | W | watts | ||||||
min | minutes | no | alternating current | ||||||
|
|
|
| direct current | no load speed | ||||
|
|
|
| ||||||
|
|
|
| Class I Construction |
|
|
|
| earthing terminal |
|
|
| ................. |
|
|
| .................. | ||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||
|
|
|
| (grounded) |
|
|
| ................. | safety alert symbol |
|
|
| ................. | Class II Construction | opm | oscillations per minute | |||
|
|
|
| (double insulated) |
|
|
|
|
|
|
|
|
| .............Read instruction manual before use |
|
|
| .................. | Use proper respiratory protection |
|
|
| ................. | Use proper eye protection |
|
|
| .................. | Use proper hearing protection |
•When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. The following table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.
|
|
| Minimum Gauge for Cord Sets |
| ||
Volts |
| Total Length of Cord in Feet | ||||
120V |
| |||||
240V |
| |||||
| ||||||
|
|
| ||||
Ampere Rating | American Wire Gauge |
| ||||
More | Not more |
| ||||
Than | Than | 18 | 16 | 16 | 14 | |
0 | - | 6 | ||||
6 | - | 10 | 18 | 16 | 14 | 12 |
10 - | 12 | 16 | 16 | 14 | 12 | |
12 - | 16 | 14 | 12 | Not Recommended | ||
|
|
|
|
|
|
|
SAVE THESE INSTRUCTIONS
FUNCTIONAL DESCRIPTION | 6. | Plunge cut blade |
| |
1. | Oscillating tool attachment |
| ||
2. | Accessory clamping lever | 7. | Adapter plate |
|
3. | Accessory holder | 8. | Bolt and top plate |
|
4. | Sanding platen | 9. | Hex wrench |
|
5. | Sand sheets |
|
|
|
| 4 |
| 5 |
|
| 3 |
|
|
|
|
|
|
| 8 |
| 1 |
|
| 9 |
|
|
| 7 | |
|
|
| 6 | |
|
|
|
|
2
ACCESSORIES
Other oscillating tool accessories are available for a wide range of applications including scraping, drywall cutting, grout removal, thin set removal, and more. Please visit www.blackanddecker.com for more details.
4