AIRCONDITIONERUSE
Operating your air conditioner properly helps you to obtain the best possible results.
This section explains proper air conditioner operation.
iMPORTANT:
-If you turn off the air conditioner, wait at least 3 minutes before turning it back on. This keeps the air conditioner from blowing a fuse or tripping a circuit breaker.
Do not try to operate your air conditioner in the Cool mode when outside temperature is below 61°F (16°C). The inside evapora- tor coil will freeze up, and the air conditioner will not operate properly.
NOTE: In the event of a power failure, your air conditioner will operate at the previous settings when the power is restored.
Energy SaveriFan runs only when cooling is needed. Press SPEED to select High, Med or Low fan speed.
Because the fan does not circulate the room air continuously, less energy is used, but the room air is not circulated as often.
NOTE: Dry mode should not be used to cool the room.
D_Y
0ENER6Y SAVER
0CA.
1.Remove the clear plastic film from the control panel.
2.Press POWER to turn on the air conditioner. The Power indicator light will turn on.
NOTE: After 5 seconds, display will show the current room temperature.
3.Select mode. See "Mode."
4.Select fan speed. See "Fan Speed."
5.Set temperature. See "Temperature."
Mode
1.Press MODE until you see the indicator light glow for the de- sired setting.
2.Choose Fan, Cool, Energy Saver or Dry.
Fan Speed
NOTE: In Dry mode, the Speed button will not operate.
1.Press SPEED until you see the indicator light glow for the desired setting.
2.Choose High, Med or Low.
0 HIGH
_J_ ME.
LOW