Temperature
Press the TEMP/TIME up arrow button to raise the temperature. Each time you press or hold the TEMP/TIME up arrow button, the temperature witl go up I°F until it reaches 90°F (32°C).
NOTE: After 5 seconds, the display witt show the current room temperature.
TEMP/TIME
_F/"C
Press the TEMP/TIME down arrow button to lower the temperature. Each time you press or hold the TEMP/TIME down arrow button, the temperature witl go down I°F until it reaches 61°F (16°C).
NOTE: After 5 seconds, the display witt show the current room temperature.
Timer Delay
To set the Timer for a 1=hour to 24=hour delay until the air conditioner turns off (the air conditioner must be On):
1.Press TIMER. Timer On indicator light witl flash. Display witl show remaining hours before the air conditioner witl turn off.
2.Press the TEMP/TIME up or down arrow button to change the delay time from 0 hour to 24 hours.
3.After 5 seconds, Timer On indicator light witl remain on. Dis- play witl show the current room temperature.
To set the Timer to turn on the air conditioner, keeping previous settings:
1.Turn off the air conditioner.
2.Press TIMER. Timer On indicator light witl flash. Display witt show remaining hours before the air conditioner witl turn on.
3.Press the TEMP/TIME up or down arrow button to change the delay time from 0 hour to 24 hours.
4.After 5 seconds, Timer On indicator light witl remain on. Display witl show the current room temperature.
To set the Timer to turn on the air conditioner, changing the previous settings:
1.Turn on the air conditioner.
2.Adjust the mode to Fan, Cool, Energy Saver or Dry.
3.For Fan, Cool or Energy Saver mode, adjust the fan speed to High, Med or Low.
NOTE: In Dry mode, the Speed button witl not operate.
4.Adjust the temperature between 61°F and 86°F (16°C and 30°C).
NOTE: In Fan mode, the temperature cannot be set.
5.Wait 3 seconds before turning off the air conditioner.
6.Press TIMER. Timer On indicator light witl flash. Display witt show remaining hours before the air conditioner witt turn on.
7.Press the TEMP/TIME up or down arrow button to change the delay time from 0 hour to 24 hours.
8.After 5 seconds, Timer On indicator light witl remain on. Dis- play witl show the current room temperature.
To clear Timer delay program:
NOTE: Air conditioner can be either on or off.
1.Press TIMER once after it has been programmed. Display witt show remaining time.
2.While the display is showing the remaining time, press TIMER again. Timer Off indicator light witl turn on.
To see or change the remaining time (in hours):
1.Press TIMER once after it has been programmed. Display witt show remaining time.
2.While the display is showing the remaining time, press the up or down TEMP/TIME button to increase or decrease the time.
3.After 5 seconds, the display witl show the current room temperature.
10
