Install outer case in window
1, Place outer case in window. Lower sash until it rests behind
front flange of top channel. Bottom channel must rest be- hind window sill.
AB
A_ouf
5°
0__.
C
A. Top channel
B. Window sash
C. Bottom channel
2.Expand both curtains to contact the window frame. Install four wood screws. One in each upper right and left of the curtains and one in each bottom tab.
3.Install one screw through center hole on top channel.
4.Use two wood screws 31/32" to fix the case to windows sash.
NOTE: To make screws easier to drive, drill a pilot hole into the
sash through clearance hole in curtains.
5, Install left & right installation bracket and as shown in fig. Install bolt(2 1/2" long flat head bolt and locknut) to the instal- lation bracket and adjust them to proper length ,then use 4 short screws to fix the bracket on the case.
6.Use a wood block between the leveling bolts and the wall if the
wall is weak or if the weight of the air conditioner falls between the studs in the wall.
1.Insert the foam seat behind the top of the lower window sash and against the glass of the upper window.
A
A. Top of lower window sash
B. Foam seal
7
