4.Adjust the temperature between 61°F and 86°F (16°C and 30°C).
NOTE: In Fan mode, the temperature cannot be set.
5.Wait 3 seconds before turning off the air conditioner.
6.Press TIMER. Timer On indicator light on the air conditioner control panel will flash. Display wilt show remaining hours before the air conditioner will turn on.
7.Press the TEMP/TIME up or down arrow button to change the delay time from 0 hour to 24 hours.
8.After 5 seconds, Timer On indicator light on the air condition- er control panel will remain on. Display will show the current room temperature.
To clear Timer delay program:
NOTE: Air conditioner can be either on or off.
1.Press TIMER once after it has been programmed. Display on the air conditioner control panel will show remaining time.
2.While the display is showing the remaining time, press TIMER again. Timer Off indicator light wilt turn on.
To see or change the remaining time (in hours):
1.Press TIMER once after it has been programmed. Display on the air conditioner control panel will show remaining time.
2.While the display is showing the remaining time, press the TEMP/TIME up or down arrow button to increase or de- crease the time.
3.After 5 seconds, the display on the air conditioner control panel wilt show the current room temperature.
direction of the airflow to the desired direction.The airflow can be
directed
Vent:The Fresh air vent allows the air conditioner to recirculat
inside air,draw fresh air into the room and exhaust stale air to the
outside.
/I/,//,
I
/i
A. 4-Way Air Flow
B. Vent
When your air conditioner is operating normally, you may hear sounds such as:
Droplets of water hitting the condenser, causing a pinging or clicking sound. The water droplets help cool the condenser.
Air movement from the fan.
Clicks from the thermostat cycle.
Vibrations or noise due to poor wall or window construction.
A
AIRCONDITIONERCARE
Your new air conditioner is designed to give you many years of dependable service. This section tells you how to clean and care for your air conditioner properly.
The air filter is removable for easy cleaning. A clean filter helps remove dust, tint, and other particles from the air and is important for best cooling and operating efficiency. Check the filter every 2 weeks to see whether it needs cleaning.
NOTE: Do not operate the air conditioner without the filter in place.
1.Turn off the air conditioner.
2.Remove the air filter by opening the front panel and removing the air filter.
A. Air filter
B. Front panel
12
