Black & Decker DCM25 manual Electrical safety, Extension cables & class 1 product, English

Models: DCM25

1 22
Download 22 pages 8.88 Kb
Page 4
Image 4
Electrical safety

ENGLISH

Before use, check the appliance for damaged or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.

Do not use the appliance if any part is damaged or defective.

Have any damaged or defective parts repaired or replaced by an authorised repair agent.

Before use, check the power supply cord for signs of damage, ageing and wear.

Do not use the appliance if the power supply cord or mains plug is damaged or defective.

If the power supply cord or mains plug is damaged or defective it must be repaired by an authorised repair agent in order to avoid a hazard. Do not cut the power supply cord and do not attempt to repair it yourself.

Never attempt to remove or replace any parts other than those specified in this manual.

Electrical safety

Before use, check that the mains voltage corresponds to the voltage on the rating plate.

This product must be earthed. Always check that the mains voltage

corresponds to the voltage on the rating plate.

Appliance plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (Class 1) appliances. Unmodified plugs and matching outlets will reduce the risk of electric shock.

Extension cables & class 1 product

A 3 core cable must be used as your tool is earthed and of class 1 construction.

Up to 30m (100 ft) can be used without loss of power.

If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.

Mains plug replacement

If a new mains plug needs to be fitted:

Safely dispose of the old plug

Connect the brown lead to the live terminal of the new plug

Connect the blue lead to the neutral terminal

If the product is class I (earthed), connect the green/yellow lead to the earth terminal.

Note: If your product is class II double insulated (only 2 wires in the cord set), no connection is to be made to the earth terminal.

Follow the fitting instructions supplied with good quality plugs

Any replacement fuse must be of the same rating as the original fuse supplied with the product.

Warning! The above section on mains plug replacement is for authorized service centre personals.

4

Page 4
Image 4
Black & Decker DCM25 manual Electrical safety, Extension cables & class 1 product, Mains plug replacement, English