Switching on and off, Brewing coffee, Technical data

ENGLISH

• Close the lid (6)

Note! Do not ﬁll above the MAX mark in the water tank.

Warning! DO NOT open the lid (6) whilst the coffee maker is on. Hot water may be ejected.

Switching on and off

•To switch the appliance on, press the on/off button (11).

•To switch the appliance off, press the on/off button (11) again.

•Ensure that the removable stand (5) is ﬁtted into the base (13).

•Add coffee as described.

•Add water as described.

•Close the lid (6)

•Place the cup onto the removable stand.

•Switch the appliance on. (The indicator light (12) on the right side of the appliance will come on.)

Note!.This product does not have an anti drip nozzle. Switch the appliance off and wait for the coffee to stop ﬂowing before removing the cup.

Warning! Before cleaning and maintenance, switch the appliance off and remove the plug from the socket.

•Remove the ﬁlter (1) and the ﬁlter holder (2) from the ﬁlter holder support (9). Remove the used coffee grounds from the ﬁlter.

•Remove the water outlet (7) by pulling it upwards.

•Wash the cup (4), water outlet (7) ﬁlter holder

(2) and the ﬁlter (1) in hot, soapy water. Rinse then dry all parts thoroughly then re-ﬁt reﬁt them.

•Wipe the outside of the appliance with a damp cloth.

If the appliance is used in an area with hard water, it is advised to de-scale the appliance when from time to time.

•Use a commercial de-scaling agent for coffee makers, or use water and white vinegar as follows:

•Fill the water tank (8) and add 3 teaspoons of vinegar. Operate the appliance as for making coffee until the reservoir is empty.

•Discard the used water and repeat the procedure 2 or 3 times with fresh water.