Additional safety instructions for coffee makers
Warning! The lid may become hot during use.
Warning! Steam may escape from the unit.
•Allow the appliance to cool before fitting or removing any parts and before cleaning.
•Do not immerse the appliance in liquid.
Use
Warning! Never use the appliance without water in the reservoir.
Before first use
•Unpack the coffee maker and remove all packaging, promotional materials and stickers. Remove all printed documents.
•Check that your mains supply is the same as the one indicated on the appliance.
•Position the appliance on a flat, stable work surface, away from the edge and other electrical appliances. Ensure that the coffee maker is not positioned under any cupboards or near any furnishings, wallpaper or similar that could be damaged by hot steam.
•Wash all removable parts of the appliance in warm, soapy water. Rinse and dry thoroughly with a soft cloth. Do not use harsh/abrasive cleaners or place any part of the appliance in the dishwasher.
Warning! Never immerse the main body of the appliance, cord set or plug in water or any other liquid.
ENGLISH
•We recommend that you first familiarise yourself with all parts of the appliance before using it for the first time. Do not fill with water or connect to the mains supply when doing this.
•To remove any remaining residue from the manufacturing process, we recommend operating the coffee maker as described in the ‘ Use ’ section. This will flush the appliance out. Use water only, do not add coffee.
Note! Ensure that the coffee maker mains cord does not overhang the edge of the worktop
Note! When the coffee maker is plugged in and operated for the first time, there may be a small amount of smoke and/or odour as the heating elements warm up. This represents no danger or malfunction with the product and should clear after a couple of uses.
Adding coffee
•Place the filter (1) in the filter holder (2). Add the desired amount of coffee.
•Open the lid (6).
•Rotate the water outlet (7) towards the back of the appliance and place the filter holder
(2) in the filter holder support (9). Make sure the support clip (3) on the filter holder (2) fits securely over the recess on the right hand side of the filter holder support (9).
•Rotate the water outlet (7) back towards the front of the appliance so it is over the coffee in the filter (1).
Adding water
Using the cup (4), fill the water tank (8) with the desired quantity of COLD water.
5
