Black & Decker EC70 manual Can Opening Tips, To Open Bottles, To Open Bags

Start

Release

Figure H

Start

Release

4.To avoid dripping or splatter, pull the cut lid out before removing the can. (Figure G)

5.To remove an opened can, hold it with one

hand and push the Operating Switch up with the other. (Figure H) The Retractable Magnet will lift automatically.

CAN OPENING TIPS

■If there is a bump or dent in the rim of the can, open the other end or start cutting just beyond the dent.

■Cans with heavy seams, uneven rims, or odd shapes may stall the Can Opener. Turn the can slightly by hand to help the cutting action.

NOTE: If the Cutting Blade needs to be replaced, the Can Opener must be returned to a Black & Decker Inc., Household Appliance Company- Owned or Authorized Service Center. A list of the Company-Owned Service Centers can be found on the insert included with this book.

Figure I

Start

Release

Figure J

Start

Release

TO OPEN BOTTLES

1.The bottle opener is located at the bottom of the unit and requires a side-to-side motion. Use it to remove metal bottle caps only.

2.To open a bottle, grasp it and position the cap under the metal “hook” in the bottle opener. Pull sideways to the right. (Figure I) “

IMPORTANT: Be sure the “hook” is not under the bottle neck or the glass may break.

TO OPEN BAGS

1.The bag opener is located at the right side of the Mounting Bracket:

2.To open a bag, grasp it with both hands and pull the top of the bag from back to front through the slot on the Bracket. (Figure J)

CAUTION: If the plastic guide over the cutting slot breaks off, the blade inside will be exposed causing a cutting hazard. If that occurs, or if the blade becomes dull, remove the Mounting Bracket and bring or send it to a Black & Decker , Household Appliance Company Owned or Authorized Service Center.

Figure K

Cover

6