CLEANING YOUR CAN OPENER
1.Unplug the can opener.
2.Press down on the Blade Release Lever to pop the Cutting Assembly loose. Remove it carefully. You may wash it in hot, sudsy water or a dishwasher. (Figure K)
3.Dry the Cutting Assembly thoroughly before replacing it. Insert the pin on the Assembly into the opening. If necessary, twist the Assembly back and forth until it is “seated”, then push it in.
4.The body of the can opener and other stationary parts can be cleaned with a damp cloth. The entire unit may be removed from the Mounting Bracket for more thorough cleaning.
SERVICE OR REPAIR
Service, if necessary, must be performed by a Black & Decker, Household Appliance
If mailing or shipping your Can Opener, remove it from the Mounting Bracket by grasping the unit and pulling forward. Pack it carefully in a sturdy carton with enough packing material to prevent damage. You may use original packaging as long as you’ve include packing material suitable for shipping. Include a note describing the problem to our Service Center and be sure to give your return address. We also suggest that you insure the package for your pro- tection.
FULL TWO-YEAR WARRANTY
Black & Decker warrants this product against any defects that are due to faulty material or workmanship for a
If the product should become defective within the warranty period, we will repair it or elect to replace it free of charge. We will return your product, transportation charges prepaid, provided it is delivered prepaid to any Black & Decker (U.S. or Canada) Inc., Household Appliance
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province.
Answers to any questions regarding warranty or service locations may be obtained by call- ing Consumer Assistance and Information in the U.S.A. at
Cover
7