|
| to get an extra heavy surge of |
|
| steam through the soleplate |
|
| steam vents. |
| 2. | Use Surge of Steam only when |
|
| the Heat/Fabric Dial is set in |
|
| the steam range. |
| 3. | To avoid water spotting, wait a |
|
| few seconds between |
|
| repeated use of the Surge of |
|
| Steam. |
|
| |
Figure G | STORING THE IRON | |
| 1. | Turn the Adjustable Steam |
|
| Control to DRY. |
| 2. | Turn the Heat/Fabric Dial to Fill. |
| 3. | Unplug the iron. |
| 4. | Allow the iron to cool and wrap |
|
| the cord. (Figure G). |
| 5. | It is not necessary to empty the |
|
| water if the iron is used |
|
| frequently. |
| 6. | The iron must be stored on its |
|
| heel rest to prevent water |
|
| leaking from the soleplate. |
FABRIC IRONING |
| Refer to the chart on the next page for |
CHART |
| recommended Heat/Fabric and Steam |
|
| Settings and ironing instructions for |
|
| various fabrics. Always read garment labels |
|
| and follow manufacturer’s ironing |
|
| instructions. |
|
|
|
|
|
|
|
| NOTE: Steam and Surge of Steam should only |
|
| be used in steam area of the Heat/Fabric Dial. |
|
| Water spotting may occur if the setting is too |
|
| low. |
|
|
|
8
