| 8. | Press and hold the Control |
|
| down until all the water has |
|
| been emptied. If necessary, |
|
| rock the iron from side to side |
|
| and front to back. |
| 9. | Release the Control and tip the |
|
| iron sideways to allow any |
|
| remaining water to drain. |
| 10. | Place the iron on its heel rest |
|
| and plug into a standard |
|
| electrical outlet. Heat for about |
|
| 2 minutes to dry out any |
|
| remaining water. |
|
|
|
Need Help? |
|
|
|
|
|
IRON WON’T | 1. Is the Power light on? (Press the ON/OFF | |
HEAT? | Button). |
|
| 2. If the Light is not on, will a lamp plugged into | |
| the outlet turn on? | |
| 3. Is the Heat/Fabric Dial adjusted to a fabric | |
| setting? |
|
|
|
|
IRON WON’T | 1. | Check to be sure there is enough water in | ||
START STEAMING? |
| the Tank. |
|
|
| 2. | Is the Adjustable Steam Dial set at | ||
|
| (light), | (medium), or | (heavy)? |
|
| Adjust the Dial to Dry and back to the | ||
|
| desired steam level. |
| |
WATER DROPLETS | 1. | Is the Heat/Fabric Dial set in a steam area | ||
COMING FROM |
| and is the Adjustable Steam Dial set at the | ||
STEAM VENTS? |
| corresponding | (light), | (medium), or |
|
| (heavy) steam setting? |
| |
2.If water droplets continue, reduce the steam or increase the temperature setting slightly.
11
