|
|
| Troubleshooting |
|
|
| Problem | Possible Cause | Possible Solution |
• Slow running, noisy or hot blades. | • Dry, corroded blades. | • Lubricate blades. | ||
|
|
| • Blades or blade support bent. | • Straighten blade or blade support. |
|
|
| • Bent or damaged teeth. | • Straighten teeth. |
|
|
| • Loose blade bolts. | • Tighten blade bolts. |
| • Unit will not start. | • Lock off not fully operated. | • Check that lock off is fully pulled back prior to | |
|
|
| • Cord not plugged in. | moving main trigger. |
|
|
| • Plug cord into a working outlet. | |
|
|
| • Circuit fuse is blown. | • Replace circuit fuse. (If the product repeatedly |
|
|
|
| causes the circuit fuse to blow, discontinue use |
|
|
|
| immediately and have it serviced at a Black+ |
|
|
| • Circuit breaker is tripped. | Decker service center or authorized servicer.) |
|
|
| • Reset circuit breaker. (If the product repeatedly | |
|
|
|
| causes the circuit breaker to trip, discontinue use |
|
|
|
| immediately and have it serviced at a |
|
|
|
| Black+Decker service center or authorized |
|
|
| • Cord or switch is damaged. | servicer.) |
|
|
| • Have cord or switch replaced at Black | |
|
|
|
| +Decker Service Center or Authorized Servicer. |
|
|
|
|
|
For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK+DECKER help line at
Imported by
Black+Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
8
