Black & Decker MZ3000PGSA English, Setting the Clock, Note If STOP/CLEAR, button is, Use Fig. C

English

•Align the glass tray (4) on top of the roller support.

•Connect the appliance to a suitable electrical supply.

Setting the Clock

When the microwave oven is connected to a suitable electrical supply, the oven will display "0:00".

To set the correct time, for example: To set 8:00 .

1Press the "CLOCK/PRE-SET" button. The hour figures will flash.

2Press the number buttons "8","0","0" in order.

3Press the "CLOCK/PRE-SET" button to finish setting the clock. The time will be shown in the LED display.

Note: If "STOP/CLEAR"	STOP	button is
	CLEAR

pressed or if there is no operation within 1 minute, the oven will revert to its previous state automatically.

Use (Fig. C)

Press the door release (8) to open the oven door then place the container onto the glass tray (4).

Close the door & press the Microwave MICROWAVE button repeatedly until the required power setting is shown in the LED display.

The Microwave power level can be adjusted to suit the required cooking method. There are five power settings available. These are:

Press Microwave once	MICROWAVE 100%
The LED display will show	"P100"
Press Microwave twice	80%
	MICROWAVE
The LED display will show	"P 80"
Press Microwave three times	50%
The LED display will show	MICROWAVE
	"P 50"
Press Microwave four times	30%
The LED display will show	MICROWAVE
	"P 30"
Press Microwave five times	10%
	MICROWAVE
The LED display will show	"P 10" -7-

Enter the required cooking time using the numbered buttons on the control panel (1).

Note: The maximum microwave cooking time is 99 minutes and 99 seconds.

START

Press the "Start / Express Cook" EXPRESS COOK button to start cooking.

Example: To cook an item at 50% power for 10 minutes

1Press the Microwave MICROWAVE button three times so that P50 shows in the LED

2Press the numeric buttons 1, 0, 0, 0 in sequence

START

3 Press the Start / Express Cook EXPRESS COOK button to start cooking

Note: During Microwave cooking, the Microwave MICROWAVE button can be pressed to display the current microwave power in the LED for 3 seconds. After three seconds, the display will revert to normal.

Note: During cooking, the "CLOCK/PRE-

SET" button can be pressed to show the current time in the LED for 2-3 seconds. The display will then revert to normal.

Once cooking has completed, an audible signal will be heard. Open the door & remove the cooked food.

Always use oven gloves when removing items from the oven.

If the door of the oven is opened during cooking, the microwave oven will automati- cally stop working. Cooking will continue after re-closing the door.

If the remaining cooking time is not required, press the "Stop / Clear" STOPCLEAR button to cancel further cooking.

Operating the oven when empty could damage the oven.

To stop the oven during operation, press the Stop / Clear STOP button.

CLEAR