English
Safety of others
•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
•Children should be supervised to ensure that they do not play with the appliance.
•Close supervision is necessary when any appliance is used by or near children.
•Never leave an appliance unattended when in use.
After use
•Switch off and remove the plug from the power outlet when not in use, before assembling or disassembling parts, cleaning or carrying out any maintenance of the appliance. Never pull the cord while removing it from the power outlet.
•Keep children and animals away from the unit and cord set.
Inspection and repairs
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Electrical safety
This product must be earthed. Always check that the power supply
corresponds to the voltage on the rating plate
Power plugs must match the outlet. Never modify the plug in any way. Do not use any adaptor plugs with earthed (Class l) appliances. Unmodified plugs and matching outlets will reduce the risk of electric shock.
Never operate an appliance directly below the
Do not insert any object into the openings on the outer case.
Extension cables & Class l product
•A
•Up to 30m (100 ft) can be used without loss of power.
•If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.
Features (Fig. A)
1Control panel
2Turntable shaft
3Roller support
4Glass tray
5Observation window
6Door
7Safety interlock system
8Door release
9Grill rack
10Heating element
•Remove all packaging from the appliance.
•Inspect the oven after unpacking for any damage such as a misaligned or damaged door, dents or holes in the door window and screen, and any dents in the cavity. If any of these are seen, DO NOT use the oven.
•Clean the appliance before first use.
Assembly (Fig. B)
Warning! Before assembly, make sure that the appliance is switched off and unplugged.
•Place the appliance on a flat, even surface.
•Open the door (6) & place the stem into the hole in the cavity base. The door is opened by pressing the door release.
•Place the roller support (3) into the hole in the cavity.