Black & Decker ORB4810-CA WARNING:

•Hold the appliance so that the dust collector

cover(6) is facing upwards.

•Press the cover release button (7) the dust

collectorcover (6) will open.

•While holding the appliance over a bin or

sink,lift out the filter (12) and empty the

contentsof the appliance.

•Replace the filter.

•Close the dust collector cover(6).

Note: The filters are re-usable and should be

cleaned regularly.

WARNING: Projectile/RespiratoryHazard: Never use the

appliancewithout the filters. Optimum dust collection will only be achieved with clean

filters.

•Regularly clean the ventilation slots in your appliance using a soft brush or dry cloth.

•Regularly clean the outside of your appliance using a damp cloth. Do not use any

abrasiveor solvent-based cleaner.

•The inside of the dust bowl can be cleaned using a soft brush or dry cloth.

•The filters can cleaned using a soft brush or dry cloth.

•The filters can be washed in warm soapy water.

•Make sure that the filters are dry before re-fitting.

The filters should be replaced every 6 to 9 months and whenever worn or damaged.

Replacement filters are available from your Black & Decker dealer.

Visit www.blackanddecker.comto locate dealers.

•Remove the old filters as described above.

•Fit the new filters as described above.

Thefilter can be washed thoroughly; however,use only mild soap and a damp cloth to

cleanthe main part of the vacuum.

IMPORTANT:To assure productSAFETY and RELIABILITY,repairs, maintenanceand

adjustment(other thanthose listed in this manual) shouldbe performed by authorized

servicecentersorother qualifiedservicepersonnel,alwaysusingidenticalreplacement

parts.

If the product does not work, check the following:

• Thecharge indicator light is on when unit is connected to charger.

• Thecharger was correctly plugged in for recharge. (It feels slightly warm to the touch.)

• Thecharger cord is not damaged and is correctly attached.

• Thecharger is plugged into a working electrical outlet.

• Theswitch is in the “OFF” position when charging.

For assistance with your product, visit our website www.blackanddecker.comfor the

location of the service center nearest you or call the BLACK & DECKER help line at

1-800-544-6986.