Black & Decker PRSM600 manual English, Figure C Using the Blender, Figure D Using the Mincer

English

If required, the bowl lid (17) can be fitted over the location (8) on the mixer head (making sure the door is facing you once it is fitted) & turned anti-clockwise. The bayonet fittings on the 2 parts will lock the lid in place. Push the required attachment - whisk (14), beater (15) or dough hook (16) onto the coupling (7) & washer so the horizontal pin enters the slot in the attachment. Turning the attachment clockwise will lock it in place. Place the required bowl (12 or 13) in the recess (10) in the stand & rotate it clockwise to lock it in position

Add the required ingredients to the bowl. Press the head release lever (4) and lower the head. Releasing the lever will lock the head in position.

Connect the Mixer to a suitable electrical supply.

For short operation, hold the control dial (3)

&rotate it anti-clockwise. Once complete, release the dial. It will automatically return to the "0" (OFF) position.

For longer operating times, rotate the control dial clockwise to select the appropriate speed.

Once mixing is completed and the unit turned off, the head can be raised and the bowl & ingredients removed.

Never approach any moving parts until they have come to a complete stop.

Figure C: Using the Blender:

Remove the blender lid (19) & filler cap (20)

from the blender jar (18), and add the ingredients. Replace the lid & cap.

Place the Mixer on a flat surface.

Ensure the Mixer head (1) is locked in the horizontal position.

Remove the outlet cover (2) from the Mixer head. Place the Blender (17) onto the outlet

&rotate it anti-clockwise until it locks in place.

Connect the appliance to a suitable electrical supply.

For short operation, hold the control dial (3)

&rotate it anti-clockwise. Once complete, release the dial. It will automatically return to the "0" (OFF) position.

For longer operating times, rotate the control dial clockwise to select the appropriate speed.

Once blending is completed and the unit turned off, the blender can be removed by rotating it clockwise to overcome the bayonet fitting.

Always operate the blender with the lid fitted.

Never approach any moving parts until they have come to a complete stop.

Figure D: Using the Mincer:

Place the Mixer on a flat surface.

Ensure the Mixer head (1) is locked in the horizontal position.

Press the attachment release lever (6) down and lift the front cap (9) to reveal a hole and slotted coupling.

-9-