English
Put the cooking bowl into the rice cooker. Check to ensure the cooking bowl is in good contact with the heating plate and add the lid to the cooking bowl.
Plug the supply cord into a suitable electric supply. The cook indicator (K) light will light up.
Press the control lever (I) down to start the cooking process.
When the cooking process is finished, the cook light will go out and the keep warm light (J) will come on automatically.
Remove the lid and stir the rice. For the best results, do this just after the keep warm function light comes on. Stirring the rice with the rice spoon (N) allows the steam to escape. This will give fluffier rice.
Steaming
The steaming function may only be used in combination with the rice cooking function.
Measure out the required amount of rice (as above) and ensure there is enough room for the steamer tray (O) on the top of the cooking bowl.
Add the food to be steamed into the steamer tray. Ensure the food is spread out evenly to ensure even steaming. Do not pile up the food.
Add the lid to the steaming tray ensuring it fits securely.
Continue with the rice cooking process (as described above). Once the rice is cooked
the food should be steamed. Remove the lid very carefully and remove the steam tray. Use a kitchen glove or a cloth as the steam tray will be very hot.
Be aware of the hot steam escaping.
Trying to steam too much food will result in the food not been adequately steamed.
After use
•Switch off and remove the plug from the socket before leaving the appliance unattended and before changing, cleaning or inspecting any parts of the appliance.
•When not in use, the appliance should be stored in a dry place. Children should not have access to stored appliances.
Cleaning and maintenance
Warning! Before cleaning and maintenance, switch the appliance off, remove the plug from the socket and allow the appliance to cool.
Warning! Do not immerse the appliance or the cord set or the plug in water or any other liquid.
•Do not wash any part of the unit in a dishwasher.
•Wipe the exterior with a damp cloth.
•Do not use scouring pads.
•If necessary, use a mild detergent to remove spots. Do not use any abrasive or solvent based cleaner.
Technical Data
Model no. | Voltage | Power | Weight |
|
|
|
|
RC1000 | 400W | 1.7Kg | |
|
|
|
|
RC1800 | 700W | 2.5Kg | |
|
|
|
|
RC1810 | 700W | 2.5Kg | |
RC2800 | 900W | 3.7Kg | |
|
|
|
|
