Black Box 120H manual Single Phone Line/Single Phone Arrangement

LINE SHARE 120H

1. Telephone (Wall) Jack (If you are
using Caller ID, connect the Caller ID								2. Power
unit to this jack, then connect the
								Supply
Line Share 120H to the Caller ID.)
									NOTE: All
									peripheral
	1		2	3	4				equipment
						FAX/			must be
		LINE-IN	TAD	PHONE MODEM
							12VAC		connected to
									the proper
									power source.
								Option

3. Answering	4. Telephone
	5. Fax Machine/Fax	6. Computer with
Machine (set
to answer on 2	Modem Card (set to	Modem card (set
or 3 rings)	answer on 1 ring)	to answer on 1
		ring)

Figure 3-3. Single Phone Line/Single Phone Arrangement.

1.Plug the RJ-11 end of a telephone line cord into the LINE-IN port on the back of the Line Share 120H. Plug the other end of the telephone line cord into the telephone (wall) jack.

2.Plug the small end of the AC power cord provided with the Line Share 120H into the power input port labeled “12 VAC” on the back of the Line Share 120H. Plug the adapter into a standard AC outlet.

The green LED lights when power is applied and remains lit, indicating its ON status.

3.To connect an answering machine, plug the RJ-11 end of a telephone line cord into the TAD port on the Line Share 120H.

4.To connect a phone, plug the RJ-11 end of a telephone line cord into the PHONE port on the Line Share 120H.

14