Black Box manual Installation, Unpacking the Line Share 120H

LINE SHARE 120H

3. Installation

The Line Share 120H is a single-line device that can be installed on any type of modular or non-modular system that consists of one or more lines, with one or more phones. A modular system consists of phone cables that can be connected and disconnected from a telephone device. A non-modular system consists of cables that are hard-wired to the telephone device and cannot be disconnected from the equipment. A telephone installer may be required to install the Line Share 120H on a non-modular system.

NOTE

Many offices have a KSU or PBX phone system. The Line Share 120H works with either of these systems. Simply follow the appropriate installation instructions provided in Section 3.7.

3.1 Unpacking the Line Share 120H

When you open the Line Share 120H box for the first time, inspect the contents. You should have the following items:

•(1) Line Share 120H

•(1) AC power adapter

•(1) telephone line cord

•This user manual

If any of these items are missing or damaged, call Black Box immediately at (724)-746-5500.

10