Black Box Using the OSD You can access the OSD by using the Infrared Remote Control (IR-RC) unit., Figure 4-6. Using the IR-RC., Figure 4-8. OSD menu icons.

724-746-5500 | blackbox.com
Page 28
724-746-5500 | blackbox.com
Chapter 4: Service Setup
Using the OSD
You can access the OSD by using the Infrared Remote Control (IR-RC) unit.
More brightness
Less brightness
More contrast
Less contrast
Press twice to reset to
factory defaults
(from flash)
Figure 4-6. Using the IR-RC.
ESC Key: Exit the OSD
without saving values.
Left Arrow:
Navigate to the left
[Parameter (-)].
Enter Key: Pop up the
OSD, selection functions
and submenus, and store
modified parameters.
Right Arrow:
Navigate to the right
[Parameter (-)].
Figure 4-7. Navigating within the OSD using the IR-RC.
Icons
The OCD is an icon-based utility.
These symbols, which appear across the top of the OCD display, show the main menu categories:
Input Select:
Specify whether the
input is VGA or DVI.
Scale Mode:
Select the screen
resolution of the
attached display
and select one of
four scaling modes.
Brightness/Contrast:
Adjust brightness or
contrast or reset to
default values.
Image:
Adjust the pixel clock
and phase. Define
picture size and
position.
Tools:
Set the OSD position
and size, and the
factory reset.
Color:
Adjust color calibra-
tion, temperature,
flesh/skin tone, hue,
and saturation.
Figure 4-8. OSD menu icons.
ACS4002A-R2