724-746-5500 | blackbox.com
Page 42
724-746-5500 | blackbox.com
Appendix B: Rackmount Options
Appendix B: Rackmount Options
The DVI-D CATx KVM Extender units can be mounted in a standard 19“ rack using the mounting kit either of two different
rackmount kits: the ACS1009A-RMK for single-head devices, and ACS2209A-RMK for dual-head devices.
Mounting the ACS1009A-RMK Rackmount-Kit
Using the ACS1009A-RMK rackmount kit, you can mount up to four 4"H x 5.6"W x 1.1"D (10.3 x 14.3 x 2.9 cm) single-head
devices into a 19" server rack. The rackmount kit requires 1U of rack space. Blank plates enable you to cover unused device
positions.
Base PlateM2, 5x2 Spacers
3 Blank Plates
M2, 5x5 Philips
countersunk screws
Figure B-1. Rackmount Kit.
Mounting Instructio ns:
• Align the holes on the base plate with the vacant screw holes on the base of the device.
• Fasten the base of the unit to the plate of the mounting kit.
• Close the remaining gaps with blanking plates.
NOTE: Use only the supplied short screws to prevent damages on the PCBs
ACS4002A-R2