Chapter 3: Operation

SELECT UTP CABLE TEST MODE: Press the “3” key to enter the UTP test mode.

START TEST: Press “SET.” The CAT5/6 UTP cable wire map will be displayed on the LCD screen.

RETURN TO MAIN MENU: Hold the MENU key to return to the Main Menu.

 

 

UTP CABLE TEST

 

TESTER SIDE

1

----------------------- 1

REMOTE

PIN NUMBERS

2

----------------------- 2

PIN NUMBERS

 

3

----------------------- 3

 

Typical CAT5/6

4

----------------------- 0

”0” means open

Cable (UTP)

5

----------------------- 0

Two “0”s is a

Wiremap

6

----------------------- 6

short circuit

 

7

----------------------- 7

 

 

8

----------------------- 8

 

Figure 3-5. UTP cable test wiremap.

3.4.4Selection 4: Video Generator: Testing a monitor using the VIDEO OUT port. Connection. Connect the monitor to the tester using the VIDEO OUT jack:

Without camera

With camera

Figure 3-6. Video generator test setup.

Drive the monitor with the tester’s video generator. Or drive the monitor with a camera “looped” through the tester.

SELECT VIDEO GENERATOR MODE: Press the “4” key to turn ON the video generator.

724-746-5500 blackbox.com

Page 19

Page 19
Image 19
Black Box CCTV Tester, CCTVTEST manual UTP Cable Test Tester Side Remote PIN Numbers, Typical CAT5/6, Without camera