Black Box LE3700A-R2 manual Available Topics Menu

ETHERNET PRINT SERVER

You must perform these steps on each file sever that will need access to the EPS queues. Users on each file server wishing to print will specify the file server’s queue name; the file server and EPS will decide which, if any, of the EPS’s queues can service the requests.

Note the name of the EPS from the back label. The following steps refer to NetWare v3.11, but are similar for v2.x:

1.Log in as Supervisor on the file server, and change directory to \SYSTEM:

f:cd \system

1a. If you have not already done so, you may need to tell the file server to allow unencrypted passwords—the EPS will not use encrypted passwords. This feature was added to NetWare 386 as a security option. By default, encryption is required, so the EPS will not be able to log in and accept jobs.

If you did not already have the following line in the startup file, you need to change this setting by hand and add it to your startup file (so it’s set for each boot). Use the file server console command line (“:”) prompt and type:

: SET ALLOW UNENCRYPTED PASSWORDS = ON <Enter>

1b. To make this command permanent, you can add a line to your AUTOEXEC.NCF startup file via the SYSCON utility. To run SYSCON, type:

F: SYSCON<Enter>

The following menu appears:

Available Topics Accounting

Change current server File server information Group Information

-> Supervisor Options User Information

Fig. 4-1. Available Topics Menu.

18