![](/images/new-backgrounds/1105423/10542339x1.webp)
CHAPTER 4: Host Configuration
Use the arrow keys to select “Supervisor Options,” and press <Enter>:
Supervisor Options
Default Account Balance/Restrictions Default Fine Restrictions
View File Server Error Log Workgroup Managers
Fig. 4-2. Supervisor Options Menu.
Select “Edit System Autoexec File” and press <Enter>. The current startup file will be shown. Add this command line anywhere in the file:
SET ALLOW UNENCRYPTED PASSWORDS = ON
Press <Escape> to exit the editor, and use the Save Changes menu to save the file. Press <Escape> and exit the SYSCON utility.
2.Perform the remaining steps via the PCONSOLE utility. To run PCONSOLE, you need to be SUPERVISOR on the file server you will be changing. Type PCONSOLE at the F: prompt to start the utility.
F:PCONSOLE<Enter>
2a. You must tell the file server what print resources are on the network. Select “Print Server Information” from the “Available Options” menu (see Fig.
Available Options
Change Current File Server
Print Queue Information
Fig. 4-3. Available Options Menu.
2b. You will be shown a list of current print servers. You need to enter the EPS’s server name and the names of the resources on the EPS that will be visible to the file server. After adding the EPS resources, you will see them in this list.
19