LGB5128A User Manual
178
This chapter allows the user to monitor the PTP configuration status and inspect the current
PTP clock settings.
Web Interface To monitor the PTP status in the Web interface:
1. Click Configuration, PTP then status.
2. Evoke “Auto-refresh” to enable the switch to update the PTP status automatically.
3. Click Refresh to update the Status information manually.
.
Figure 3- 22.1: The PTP status
Parameter description:
One_pps_mode:
Shows the current One_pps_mode configured.
1. Output : Enable the 1 pps clock output.
2. Input : Enable the 1 pps clock input.
3. Disable : Disable the 1 pps clock in/out-put.
External Enable:
Shows the current External clock output configuration.
1. True : Enable the external clock output.
2. False : Disable the external clock output.
VCXO_Enable:
Shows the current VCXO rate adjustment configuration.
1. True : Enable the external VCXO rate adjustment.
2. False : Disable the external VCXO rate adjustment.
Clock Frequency:
Shows the current clock frequency used by the External Clock.The possible range of
values are 1–25000000 (1–25 MHz).
Clock Instance:
Indicates a particular Clock Instance [0..3]. Click on the Clock Instance number to monitor
the Clock details.
Device Type:
Indicates the Type of the Clock Instance. There are five Device Types.
1.Ord-Bound - Clock's Device Type is Ordinary-Boundary Clock.
2.P2p Transp - Clock's Device Type is Peer-to-Peer Transparent Clock.
3.E2e Transp - Clock's Device Type is End-to-End Transparent Clock.
4.MastrOnly - Clock's Device Type is Master Only.