211
Parameter description:
Auto-refresh :
Click the box next to auto-refresh and the device will refresh the information automatically.
Upper right icon (Refresh, Clear):
Click on these icons to refresh the RADIUS Statistics information by manual or to clear all
entries.
4-7 Port Security This section shows you how to configure the Port Security settings of the Switch. You can use
the P ort Security feature to restrict input to an interface by limiting and identifyin g MAC
addresses.
4-7.1 Limit Control
This section shows you to to configure the Port Security settings of the Switch. You can use
the P ort Security feature to restrict input to an interface by limiting and identifyin g MAC
addresses.
Web Interface
To configure a System Configuration of Limit Control in the Web interface:
1. Select “Enabled” in the System Configuration Mode.
2. Check Aging Enabled.
3. Set Aging Period (Default is 3600 seconds).
To configure a Port Configuration of Limit Control in the Web interface:
1. Select “Enabled” in the Mode of Port Configuration.
2. Specify the maximum number of MAC addresses in the Limit of Port Configuration.
3. Set Action (Trap, Shutdown, Trap & Shutdown).
4. Click Save.
Figure 4-7.1: The Port Security Limit Control Configuration