CHAPTER 3 | Installing the Switch
Mounting
3. If installing a sing le switch only, turn to “Connecting to a Power Source”
on page 51.
4. If installing multiple switches, mount them in the rack, one below the other,
in any order.
5. If also insta lling an RPS, mount it in the rack below the other devices.
DESKTOP OR SHELF
M
OUNTING
1. Attach the four adhesive feet to the bottom of the first switch.
Figure 15: Attaching the Adhesive Feet
2. Set the device on a flat surface near an AC power source, making sure th ere
are at least two inches of space on all sides for prope r air flow.
3. If installing a single switch only, go to “Connecting to a Power Source” on
page 51.
4. If installing mul tiple switches, attach four adhesive feet to each one. Place
each device squarely on top of the one below, in any order.
5. If also installing an RPS, place it close to the stack.
– 46 –