Black Box LGB6000SC-001, LGB6001C, LGB6000SC-004 manual Crossover Wiring, Straight-through Wiring

CHAPTER B Cables

Twisted-Pair Cable and Pin Assignments

Figure 26: Straight-through Wiring

EIA/TIA 568B RJ-45 Wiring Standard 10/100BASE-TX Straight-through Cable

				White/Orange Stripe
				Orange
End A	1			W hite/Green Stripe	1
		2		Blue W hite/Blue	2	End B
		3			3
		4		Stripe Green	4
			5		5
		6		W hite/Brown Stripe	6
		7			7
	8				8

Brown

CROSSOVER WIRING

If the twisted-pair cable is to join two ports and either both ports are labeled with an “X” (MDI-X) or neither port is labeled with an “X” (MDI), a crossover must be implemented in the wiring. (When auto-negotiation is enabled for any RJ-45 port on this switch, you can use either straight-through or crossover cable to connect to any device type.)

You must connect all four wire pairs as shown in the following diagram to support Gigabit Ethernet.

Figure 27: Crossover Wiring

EIA/TIA 568B RJ-45 Wiring Standard 10/100BASE-TX Crossover Cable

				W hite/Orange Stripe
				Orange
End A	1			W hite/Green Stripe	1
		2		Blue W hite/Blue	2	End B
		3			3
		4		Stripe Green	4
			5		5
		6		W hite/Brown Stripe	6
		7			7
	8				8

Brown

– 73 –