Black Box PCW22A-R3, PCW22A-R4 manual Command PASS-THRU

PROTOCOL CONVERTER A/S-2G

3.4.8 COMMAND PASS-THRU

To use the command pass-thru feature, the command must be preceded by &% and terminated by &%.

Example: &%-Command-&%

Commands consist of character pairs. Each pair must represent a valid Hexidecimal value (i.e. zero through 9 or A through F). Example: To send an escape sequence to an attached ASCII device, such as “ESC A,” the following EBCDIC string must be sent to the A/S-2G: &%lB41&%.

14