ServSensor EXP 8
Figure 4-3. SNMP Trap screen.
5. Fill in the following information:
•Enter a name for the SNMP notification.
•Enter the IP address of the SNMP trap.
•Enter the community name of the SNMP trap.
6.Click the “Add Trap Destination” button.
7.Input another trap or click on the “Next” button. The screen shown in Figure 4-4 appears.
Figure 4-4. SNMP trap notification screen.
8.Enter the Maximum Times to Resend and the Resend Intervals (secs). These parameters set the maximum number of times to send the trap notification and the time interval between each notification.
Page 20 |
