Black Box ServSensor, EXP 8 manual Select the expansion board, then select the sensor

ServSensor EXP 8

12.Once we have created the parameters for the SNMP trap, we need to make it active. To do this, go back to the “Notification” tab. It should look like the screen shown in Figure 4-7.

Figure 4-7. Notification tab.

13.Select the sensor and SNMP trap parameters as before. Figure 4-8 appears. Select the expansion board, then select the sensor. Click “Next.”

Figure 4-8. Select the expansion board, then select the sensor.

Page 22 724-746-5500 blackbox.com