Black Box 8x8 DVI-D Matrix Switches Entering a Sequence of Commands on the Front Control Panel

Chapter 5: Operation and Control

5.3 Entering a Sequence of Commands on the Front Control Panel

Figure 5-1. Press the button for input channel number “1“. The LCD displays: ”1”.

Figure 5-2. Press the button for switching mode “AV“. The LCD displays “B”.

Figure 5-3. Press the button for the first output channel, number “3“. The LCD displays ”3”.

Figure 5-4. Press the ”Break” button: ”/”. The LCD displays a comma [”,“] to indicate a break between two channels

in a command.

Figure 5-5. Press the button for the second output channel, number “4“. The LCD displays “4“.

Figure 5-6. Press the button “END“ to finish the command. The LCD displays a period [“.“] to indicate that the sequence is

completed.

AVSW-DVI8x8 Page 17