Chapter 2: Overview
Table 2-1. Local and remote units components.
|
|
| Connect the multimode optical fiber cable to | |
L1 | R1 | interface | this port. | |
|
|
|
| |
L2 | — |
| Connect to the HDMI source. | |
|
| HDMI connector |
| |
— | R2 | Connect to the HDMI monitor. | ||
| ||||
|
|
|
| |
L3 | R3 | Power supply | Apply the proper power to the unit. | |
|
|
|
| |
L4 | R4 | Video OK LED | Yellow: Video signal OK/EDID configuration | |
(see Chapter 5). | ||||
|
|
| ||
|
|
|
| |
|
|
| Green: Power on | |
L5 | R5 | Link OK/Power LED | Blue: Connect to a | |
|
|
| unit. | |
|
|
|
| |
L6 | R6 | HDMI connector | Connect to the HDMI monitor | |
|
|
|
| |
L7 | R7 | IR control jack | Plug the external sensor here | |
(L7: Transmitter/R7: Receiver) | ||||
|
|
| ||
|
|
|
| |
L8 | — | EDID config button | EDID Configuration (see Chapter 5). | |
|
|
|
|
Page 10 |
