Blackberry version 5.2 manual Functional changes, Description

Release Notes	Functional changes
Functional changes
		1

The following table lists the functional changes for BlackBerry Mobile Voice System 5.2.

Item	Description
Call forwarding	If the BlackBerry MVS administrator enables call forwarding, a BlackBerry MVS user
	can forward incoming BlackBerry MVS calls to an internal extension or an external
	phone. This feature is not available if your organization routes call through a SIP
	gateway.
Optional ANI Numbers	If you are configuring your organization's BlackBerry MVS for PBX-initiated calling, you
Available for Identifying	can define optional ANI numbers. Some wireless networks that allow roaming might
BlackBerry MVS Calls list	not support the additional calling party number field. You specify additional numbers
	in this list for PBX trunks that route calls to BlackBerry devices. The BlackBerry MVS
	Client uses a combination of the caller identification number and the numbers in the
	Optional ANI numbers list to identify BlackBerry MVS calls.
Roaming status and	When you generate a CDR report you can now see if users were roaming and the name
network name in CDR	of the network that they were on.
reports
BlackBerry MVS Only	You can turn off MVS Only Calling for incoming or outgoing calls when a user is roaming
Calling update	or is not roaming.
Validation of caller	During normal call setup some wireless networks might alter the number in the calling
identification for PBX-	party number field of the INVITE. If the BlackBerry MVS Client does not recognize the
initiated calls	calling party number in a PBX-initiated call it will reject the call because it is expecting
	the calling party number to be the Caller Identification Number that you have set in
	the MVS Console. To avoid this, you can permit the BlackBerry MVS Client to ignore
	the entry in the calling party number field of the INVITE. When you do this, the
	BlackBerry MVS Client considers the call to be from the PBX and accepts the call. When
	this feature is enabled, users cannot move calls from Voice over Wi-Fi to Voice over
	Mobile or move calls from Voice over Mobile to Voice over Wi-Fi.
The device can fall back to	If you select the "Device can use the no data coverage number to make calls when the
use the no data coverage	network is experiencing congestion" option, you must also type a phone number in
number to make outgoing	the No Data Coverage Number field on the BlackBerry MVS Server page in the MVS
calls	Console. When the PBX takes too long to initiate an outgoing call, the BlackBerry device
	will use the no data coverage number to initiate the call. This option is enabled by
	default, however your organization might not need to use it for several reasons:
	• Your organization's data calls set up successfully
	• You do not want to disable No Data Calling across the entire product suite
	• BlackBerry device-initiated calling charges are not acceptable
	• You do not want your organization's users to fallback to a no data call

2