BLADE OS 5.1 Release Notes
ISL Layer 2 Protocol Enhancements
BLADEOS 5.1 now supports additional Layer 2 protocols on
VRRP
STP
RSTP/MSTP
802.1Q VLAN Tagging
802.1p QoS/CoS
802.1X
ACLs
STP Fast Uplink Bridge Priority
With BLADEOS 5.1, the Fast Uplink Convergence bridge priority has been set to 65535.
CLI List and Range Inputs
For CLI commands that allow an individual item to be selected from within a numeric range, lists and ranges of items can now be specified. For example, the /info/vlan command permits the following options:
# /info/vlan | (show all VLANs) |
# /info/vlan 1 | (show only VLAN 1) |
# /info/vlan 1,3,4095 | (show listed VLANs) |
# /info/vlan | (show range 1 through 20) |
# /info/vlan | (show multiple ranges) |
# /info/vlan | (show a mix of lists and ranges) |
|
|
The numbers in a range must be separated by a dash: <start of
Multiple ranges or list items are permitted using a comma: <range or item 1>,<range or item 2> Do not use spaces within list and range specifications.
Ranges can also be used to apply the same command option to multiple items. For example, to enable multiple ports with one command:
# /cfg/port | (Enable ports 1 though 4) |
|
|
Note – Port ranges accept only port numbers, not aliases such as INT1 or EXT1
BMD00098, December 2009 | 15 |
