Blaupunkt 400 BT ‘n‘C mode, Changing to CD/MP3/WMA/C‘n‘C/ CD changer mode

CD/MP3/WMA/C‘n‘C/CD changer mode

•Blaupunkt cannot guarantee the flawless function of copy-protected CDs and all CD blanks and USB data carriers available on the market.

Note the following information when preparing an MP3/WMA data carrier:

•Naming of tracks and directories:

–Max. 16 characters (CD) or 24 charac- ters (USB) incl. the file extension ".mp3" or ".wma" (if more characters are used, the number of tracks and folders that are recognisable by the car sound system is reduced)

–No umlauts or special characters

•CD formats: Audio CD (CDDA), CD-R/RW,

Ø: 12 cm

•CD data formats: ISO 9669 Level 1 and 2, Joliet

•CD burn speed: Max. 16x (recommended)

•USB format/file system: Mass storage device/ FAT32

•File extension of audio files:

–.MP3 for MP3 files

–.WMA for WMA files

•WMA files only without Digital Rights Manage- ment (DRM) and created with Windows Media Player version 8 or later

•MP3 ID3 tags: Version 1 and 2

•Bitrate for creating audio files:

–MP3: 32 to 320 kbps

–WMA: 32 to 192 kbps

•Max. number of tracks: 20,000

C‘n‘C mode

The C'n'C interface from Blaupunkt (C'n'C = Com- mand and Control) allows an even more conven- ient control of devices and data carriers that are connected to the car sound system via a C'n'C- ready Blaupunkt interface.

Before connecting a C'n'C-ready Blaupunkt inter- face, check the mode of the rear AUX input. For further details, please read the section "Rear AUX input" in the chapter "External audio sources".

CD changer mode

You can connect the following CD changers to the car sound system:

•Blaupunkt CDC A03

•Blaupunkt CDC A08

•Blaupunkt IDC A09

Information on handling CDs, inserting CDs and operating the CD changer can be found in the operating instructions supplied with your CD changer.

Before connecting a CD changer, check the mode of the rear AUX input. For further details, please read the section "Rear AUX input" in the chapter "External audio sources".

Changing to CD/MP3/WMA/C‘n‘C/ CD changer mode

￿Press the SRC button 6 repeatedly until the desired audio source is displayed:

•"CD": Inserted CD.

•"MP3": Inserted CD that has already been recognised as MP3 CD.

•"USB": Connected USB data carrier.

•Name of the device connected via C‘n‘C

•"CDC / AUX": Connected CD changer (if no other external audio source is connected).

Notes:

•The respective audio source can be select- ed only if a corresponding CD is inserted or a corresponding device (e.g. a USB data carrier or CD changer) is connected.

•If the car sound system first has to read the data of a connected device or data car- rier before the playback, the display shows "READING". For large data volumes, this may take up to 1 minute. If the device or data carrier is defective or the transferred data cannot be played back, a correspond- ing message appears on the display (e.g. "ERROR" or "USB ERROR").

36