Blaupunkt 400 BT Storing stations/Calling stored stations, Mation is switched on

- or -

￿ Briefly press the station button 1 - 5 < to call up the stored station.

Scanning stations

The scan function is used to scan every receivable station of the current waveband.

￿ Press the MENU•OK button ? for approx. 2 seconds to start the scan, or long to con- tinue playing the currently set station.

During the scan, the display alternately dis- plays "SCAN" and the current frequency as well as memory bank or station name.

Note:

For radio mode, you can adjust the scan time for each station (see the ch. "User settings", section "Performing settings in the user menu", "SCAN TIME" menu item).

34

Radio mode

Notes:

•For the tuner region "EUROPE": In the FM waveband, only traffic information stations are tuned into if the priority for traffic infor-

mation () is switched on.

•For the tuner regions "EUROPE", "USA" and "S AMERICA": In the FM waveband, the next station with the currently selected programme type is tuned into if the PTY function is activated (see the ch. "PTY").

•The sensitivity of seek tuning can be ad- justed (see the chapter "User settings", section "Performing settings in the user menu", menu item "SENS").

Storing stations/Calling stored stations

￿Select the desired memory bank.

￿If necessary, set the desired station.

￿Press the station button 1 - 5 <for approx. 2 seconds to store the current station under the button.

Storing stations automatically (Travelstore)

With Travelstore, you can automatically search for and store the 5 FM stations offering the strongest reception in the region in one memory bank, Any previously stored stations in this memory bank are deleted in the process.

In the tuner regions "EUROPE" and "THAI", you can store 5 FM stations in the FMT memory bank with Travelstore. In the tuner regions "USA" and "S AMERICA", you can also store 5 AM stations in the AMT memory bank.

￿Select a memory bank of the desired wave- band, e.g. FM1 or AM.

￿Press the button @ / 2 for approx. 2 seconds.

The tuner starts the automatic station seek tuning; the display shows "FM TSTORE" or "AM TSTORE". After the storing is completed, the radio plays the station at memory location 1 of the FMT or AMT level.

Note:

For the tuner region "EUROPE": If the priority

for traffic information is switched on (), only traffic information stations are stored.

PTY

In the tuner regions "EUROPE", "USA" and "S AMERICA", an FM station can transmit its cur- rent programme type, e.g. CULTURE, POP, JAZZ, ROCK, SPORT or SCIENCE. Hence, the PTY func- tion allows a targeted search for broadcasts of a certain programme type, e.g. for rock or sports broadcasts. Note that PTY is not supported by all stations.