32
Placing the device in operation | Traffi c information

Volume

Adjusting the volume
You can adjust the volume in steps from 0 (off) to
50 (maximum).
Turn the volume control 4 to change the
volume.
Note:
If a telephone or navigation system is connect-
ed with the car sound system as described in
the installation instructions, the car sound
system is muted in case of a telephone call
or navigation announcement so that you can
hear the playback of the telephone or naviga-
tion system undisturbed. While it is muted,
the display shows "TELEPHONE".
Muting the car sound system (Mute)
You can quickly reduce the volume to a preset
level.
Briefl y press the On/Off button 3 to mute
the car sound system or to reactivate the pre-
vious volume.
While it is switched low, the display shows
"MUTE".
To adjust the mute volume, please read the sec-
tion "Performing settings in the user menu", "Mute
LVL" menu item in the chapter "User settings".

Switching demo mode on/off

The demo mode shows the functions of the car
sound system as scrolling text on the display. You
can turn the demo mode on or off:
Switch off the car sound system if it is not
already turned off.
Press and hold the buttons MENU•OK ?
and 2 < at the same time and press the On/
Off button 3.
The car sound system switches on. The dis-
play briefl y shows "DEMO MODE" if you
switched on the demo mode. By pressing any
button, the demo mode is interrupted and
you can operate the device.
쏅
쏅
쏅
쏅

Displaying version numbers

You can display the version numbers of the differ-
ent device components.
Switch off the car sound system if it is not
already turned off.
Press and hold the buttons MENU•OK ?
and 1 < at the same time and press the On/
Off button 3.
The car sound system switches on. The dis-
play shows the version number of the fi rst
component. The fi rst character identifi es the
component: P = CPU, E = EPROM, A = Accor-
do, B = Bluetooth®.
Press the button 5 / > to display the
version number of the other components.
Press the MENU•OK button ? to return to

the previously played audio source.

Traffi c information
In the tuner region "EUROPE", an FM station can
identify traffi c reports by means of an RDS sig-
nal. If the priority for traffi c announcements is
switched on, a traffi c announcement is automati-
cally switched through, even if the car sound sys-
tem is currently not in radio mode or if a station of
the wavebands MW or LW is set.
If priority is switched on, the display shows the
traffi c jam symbol ( ). "TRAFFIC" is displayed
during a switched-through traffi c announcement.
To switch the priority on and off, please read the
section "Performing settings in the user menu",
"TRAF" menu item in the chapter "User settings".
Notes:
The volume is increased for the duration
of the switched-through traffi c announce-
ment. You can adjust the minimum vol-
ume for traffi c announcements (see the
ch. "User settings", section "Performing
settings in the user menu", "TA VOLUME"
menu item).
쏅
쏅
쏅
쏅
•
02_Toronto400BT_gb.indd 3202_Toronto400BT_gb.indd 32 03.02.2009 16:04:21 Uhr03.02.2009 16:04:21 Uhr