External audio sources, Front AUX-IN socket

External audio sources

Front AUX-IN socket

Danger! Increased risk of injury from connector.

In case of an accident, the protruding connector in the front AUX-IN socket may cause injuries. The use of straight plugs or adapters leads to an increased risk of injury.

For this reason, we recommend using angled jack plugs, e.g. the Blaupunkt accessories cable (7 607 001 535).

As soon as an external audio source, such as a portable CD/MiniDisc or MP3 player is connected to the Front-AUX-IN socket, it can be selected with the SRC button 6. "FRONT AUX" then appears on the display.

Rear AUX input

Different external audio sources can be connect- ed to the car sound system via the rear AUX input (Rear-AUX-IN):

•C‘n‘C-ready devices from the Blaupunkt ac- cessories programme (e.g. a C‘n‘C-ready Bluetooth®/USB or iPod®/USB interface; C‘n‘C = Command and Control).

•CD changer

•Other external audio sources, such as portable CD players, MiniDisc players, MP3 players or a non-C‘n‘C-capable Blaupunkt interface.

Note:

An adapter cable is needed to connect an external audio source via the rear AUX input. You can obtain this cable (Blaupunkt no.: 7 607 897 093) from your Blaupunkt dealer.

Before you connect a certain device, ﬁrst check the mode of the rear AUX input and, if neces- sary, change the setting (see ch. "User settings", section "Performing settings in the user menu",

"CDC" menu item). Ensure that you change the setting only as long as no device is connected to the rear AUX input. If necessary, remove con- nected devices ﬁrst while the car sound system is switched off.

Starting C'n'C mode

Press the SRC button 6 repeatedly until the name of the device connected via C'n'C appears on the display.

The playback starts.

Notes:

•The C'n'C mode can be selected only if a suitable device is connected via a C'n'C- ready interface.

•To operate the radio in C‘n‘C mode, please read the chapter "CD/MP3/WMA/C‘n‘C/CD changer mode".

•When using suitable adapter cables, you can connect up to 3 C'n'C-ready Blaupunkt interfaces to the car sound system. For the car sound system to distinguish the differ- ent interfaces, you can assign an individual device number to every interface (see ch. "User settings", section "Performing set- tings in the user menu", "C‘N‘C" menu item).

Starting AUX mode

Press the SRC button 6 repeatedly until "CDC / AUX" appears on the display.

The playback starts.

Note:

You can enter a separate name for the rear AUX input that is shown on the display in AUX mode if you selected the connected au- dio source (see ch. "User settings", section "Performing settings in the user menu", "AUX EDIT" menu item).

Blaupunkt 400 BT External audio sources, Front AUX-IN socket, Rear AUX input, Starting CnC mode

Models: 400 BT