id.txt:

Display of technical data

 

 

 

 

Bluetooth USB Interface

Product name of the interface

 

7 607 545 550 001

Blaupunkt product no

 

BT-ID: <0-19-61-xx-yy-zz>

Bluetooth address (serial number of the interface)

 

HW ver: 1

Hardware version, here "1"

 

SW ver: 8C01VW

Software version, here "8C01VW"

 

P.Date 7113 P.Code: CN

Production date and code (coded)

 

Config:[CDC_..] [CFG_PB_..]

Configurations defined in the interface

 

 

 

Changing the configuration (PTT)

This requires:

PC with Internet connection

Removable USB device with at least 4 MB memory (FAT16 or FAT32 formatting)

ZIP software to unzip the configuration files

Loading a configuration file

The Bluetooth USB interface comes ex factory with a standard configuration that offers reliable operation in combination with as many radio mo- dels and Bluetooth devices as possible.

You can match various settings from the above ta- bles to your personal preferences or technical re- quirements by loading a configuration file.

The following configuration is available:

Config_VW_universal.txt

In the download archive you will find the file "config_VW_universal.txt". This file in- cludes all possible configuration settings. You can select your favorite configuration by ac- tivating (remove # in the first column) or deac- tivating (add # in the first column) the desired parameters.

For this, proceed as follows:

￿Create a new "Blaupunkt" directory on the USB removable media drive.

￿Copy the file "config_universal.txt" from the unpacked download archive into the Blaupunkt directory of your USB data medi- um.

￿Rename the file in "config.txt".

￿Open the "config.txt" file with a text editor, e.g. Windows Notepad.

￿(De) activate the desired parameters. Remove/add # in the first column, see notes in the file.

￿Store the file and close the editor.

￿Deactivate the USB data medium on your PC.

￿Carry out the operating steps on "Changing the configuration of your interface" described in the following.

Changing the configuration in your vehicle:

￿Connect the USB device with the USB cable of the interface.

￿Turn on your car sound system.

￿After a few seconds (max. one minute), the interface recognises the file, analyses it and stores the modified configuration in the in- terface.

￿Switch the car sound system off and on again.

￿The new configuration is now activated.

40

Page 21
Image 21
Blaupunkt 7 607 545 550 manual Changing the configuration PTT, Id.txt Display of technical data, Loading a configuration file