RADIO MODE
Switching REGIONAL on/off
➮Press the MENU button 9.
➮Press the 
or 
button 7 repeat- edly until “REGIONAL” appears in the display. “OFF” or “ON” is dis- played alongside “REGIONAL”.
➮To switch REGIONAL on/off, press the 
or 
button 7.
➮Press the MENU button 9 or the OK button :.
Switching the RDS function on/off
If you want to use the RDS functions (AF and REGIONAL),
➮press the RDS button 3.
The RDS functions are active when RDS lights up in the display.
Selecting the waveband / memory bank
This device can receive programmes broadcast over the FM frequency range as well as the MW and LW (AM) wave- bands. There are three memory banks available for the FM waveband (FM1, FM2 and FMT) and one for each of the MW and LW wavebands.
Six stations can be stored in each mem- ory bank.
To switch between the FM memory banks (FM1, FM2 and FMT) and the MW and LW wavebands,
➮briefly press the BND•TS button
4.
Tuning into a station
There are various ways of tuning into a station.
Automatic station seek tuning
➮Press the 
or 
button 7.
The radio tunes into the next receiva- ble station.
Tuning into stations manually
You can also tune into stations manual- ly.
Note:
●You can only tune into stations manually if the RDS function is de- activated.
➮Press the 
or 
button 7.
Browsing through broadcasting networks (only FM)
If a radio station provides several pro- grammes, you have the option of brows- ing through its
Note:
●The RDS function must be activat- ed before you can use this feature.
➮Press the 
or 
button 7 to switch to the next station on the broadcasting network.
Note:
●When using this feature, you will only be able to switch to stations that you have received once before already. To receive the stations, use the Scan or Travelstore func- tion.
44
