CLOCK - TIME
CLOCK - Time
Briefly displaying the time
You can make the time appear continu- ously in the bottom part of the display while any audio source is activated. For further information on this, read the rel- evant sections in the relevant chapters.
Setting the clock time
To set the clock time,
➮press the MENU button 9.
➮Press the 
or 
button 7 repeat- edly until “CLOCK SET” appears in the display.
➮Press the 
button 7.
The time appears in the display. The minutes flash and can be adjusted.
➮Adjust the minutes using the 
/ 
buttons 7.
Once the minutes are set,
➮press the 
button 7. The hours flash.
➮Adjust the hours using the 
/ 
buttons 7.
➮Press the MENU button 9 twice or the OK button : twice.
Selecting 12/24-hour clock mode
➮Press the MENU button 9. “MENU” appears in the display.
➮Press the 
or 
button 7 repeat- edly until “24 H MODE” or “12 H MODE” appears in the display.
➮Press the 
or 
button 7 to switch between the modes.
When you have finished making your changes,
➮press the MENU button 9 or the OK button :.
Displaying the time continuously when the device is off and the ignition is on
To display the time when the device is off and the vehicle ignition is on,
➮press the MENU button 9. “MENU” appears in the display.
➮Press the 
or 
button 7 repeat- edly until “CL DISP OFF” or “CL DISP ON” appears in the dis- play.
➮Press the 
or 
button 7 to switch between the ON/OFF set- tings.
When you have finished making your changes,
➮press the MENU button 9 or the OK button :.
60
