3
1
2 4
3
1
2 4
ENGLISH 29
8. Operating the tuner
Note: We will now describe operating the tuner via the buttons on the remote control. If buttons on the local keyboard are required for operation, these buttons will be mentioned.
8.1Tuning to radio stations (FM, FM-M and MW band)
1 Press SELECT (3) to select the RECVR.
2 Use TUNER (4) to select the tuner as source and select the required waveband
(FM,
3Keep ∞ or § (8) pressed for about 1 second then release.
>'SEARCH' appears on TV screen and middle display.The tuner now starts searching for a radio station with sufficient signal strength.
>Waveband and station (station name or frequency) are shown on the TV screen and the middle display. If the radio signal is stereo, i will appear.
•Press ∞ or § (8) again to interrupt searching.
4Repeat step 3 until you find the desired radio station.
•To tune to a weak radio station, briefly press ∞ or § (8) as often as necessary for optimum reception.
8.2 Preset radio stations (FM, FM-M and MW band)
Up to 40 preset radio stations can be stored in the tuner memory.
Preparation
1Make sure your TV is switched on.
2Press SELECT (3) to select RECVR.
3Press TUNER (3) to select the tuner as source.
Automatic searching and storing
Your DFR9000 searches for radio stations with sufficient signal strength automatically and stores them in the memory.
1Press SYSTEM MENU (5) to open the system menu.
>The main menu appears on your TV screen.
2Use 4 (6) to select ‘Tuner’ and enter with 2 (6).
>The tuner menu appears on your TV screen.
•Press TUNER (4) if you wish to change the waveband.
3 ‘Autoprogram’ will be selected. Enter with 2 (6).
4 Use 3 or 4 (7) to select the station number from which onwards the found radio
stations will be stored and confirm with OK (7).
> 'ACTIVE' appears on middle display and TV screen.
Automatic search starts and radio stations with sufficient signal strength will be stored in the memory. Already stored radio stations will be deleted.The current station and any higher station will be deleted.
5Press SYSTEM MENU (5) to close the system menu.
> Search will stop as soon as 40 radio stations have been stored.
Note: During automatic searching you can leave the ‘Tuner’ menu to make other settings, ‘Active’ then starts flashing on the TV screen.
Manual searching and storing
1Press SYSTEM MENU (5) to open the system menu.
>The main menu appears on your TV screen.
2Use 4 (6) to select ‘Tuner’ and enter with 2 (6).
>The tuner menu appears on your TV screen.
3Use 4 (6) to select ‘Set presets’ and enter with 2 (6).
>'PRESETS' appears on TV screen and middle display.
4Use 4 and 3 (6) to select a preset number.
5Use 1 and 2 (6) to select a radio station (frequency) you wish to store under the selected number. Confirm with with OK (7).
>'STORED' appears on middle display and TV screen. The radio station is now stored under this number.
