24ENGLISH
5. System menu
All receiver settings (except sound adjustments) are done via On Screen Displays and with help of the following buttons:
on local keyboard: System Menu (5), OK (4), 1/2 (3) and 3/4 (2). When the system menu is active, the SOURCE rotary (2) functions as up/down selection button.
on remote control: System menu (5), OK (7) and 1/2/3/4 (6).
We will now describe operating your DFR9000 via the buttons on the remote control. If buttons on the local keyboard are required for operation, these buttons will be mentioned. The receiver is set to standard specifications at the factory. However, you can adjust these specifications to suit your own preferences. Some settings have to be made before operating your DFR9000. For this see '6. Setting up the receiver'.The receiver menu screens allow you to adjust the various settings.
For an overview and explanation of all menus see '10. System menu overview'.
Note: Submenu settings can always be undone by selecting ‘Default’ at the bottom of that submenu. To reset all user settings to the default factory settings, select ‘Reset all’ in the ‘Configuration’ submenu.
5.1 Basic menu navigating
1Press B (1) to switch on the receiver.
>The Standby/On indicator (1) on the receiver goes out and 'WELCOME' appears on the middle display.
2Switch on your TV and select A/V input.
3Use SELECT (3) to select RECVR.
4Use the source selection buttons (4) to select the desired A/V source.
5Press SYSTEM MENU (5) to open the system menu.
>The ring around the SOURCE rotary (2) on the receiver starts flashing and the main menu appears on your TV screen.
> The buttons that can be used for navigating through the menu are shown on the middle display and at the bottom of the TV screen.
6Use 3 and 4 (6) to select the submenu you wish to change settings for and confirm with 2 (6).
>The submenu items appear on your TV screen, followed by an overview of possible settings.
7Use 3 and 4 (6) to select an item in the submenu and enter with 2 (6).
8Use 3 and 4 (6) to set the value and confirm with OK (7).
•Use 1 (6) or 9 (9) to exit the menu without storing any setting.
9 Press SYSTEM MENU (5) to close the system menu.
