Philips DFR9000 manual Rear view, Video 1 in R, G, B, S, Video 2 in R, G, B, S

10ENGLISH

3.2 Rear view

Note: Most of the input connectors at the rear of your DFR9000 are assigned for connecting to a specific audio/video playback/recording device. These connectors can be reassigned in the system menu. For this see ‘6.7 Reassigning input sockets’ and ‘10.7 A/V input menu’.

16MAINS

Mains inlet socket.

17SPEAKERS (4 OHM NOMINAL) Speaker connection panel for connecting: L/R - Left (L) and right (R) front speakers;

SL/SR - Surround left (SL) and surround right (SR) speakers; C - Centre speaker.

6.1SB/5.1SUB - Surround back speaker.To be connected in a 6.1 speaker configuration. If no surround back speaker is connected (5.1 or less speaker configuration), these sockets can be used for connecting a passive subwoofer.

18ANTENNA

FM-, AM- and DAB antenna connectors.

19VIDEO 1 IN (R, G, B, S)

RGBS video input sockets for connection to the SCART connector of a DVD player/ recorder using the 6-cinch to Scart cable supplied.

These sockets can be reassigned for connection to other video equipment.

20VIDEO 2 IN (R, G, B, S)

RGBS video input sockets for connection to the SCART connector of a satellite receiver, using the 6-cinch to Scart cable supplied.

These sockets can be reassigned for connection to other video equipment.

21

22

23

VIDEO

TV IN / GAME IN / DVD IN

CVBS (upper row) and S-Video (lower row) video input sockets for connecting to the CVBS or S-Video output sockets of a TV, game console or DVD player/recorder. These sockets can be reassigned for connection to other video equipment.

REC OUT

CVBS (upper socket) and S-Video (lower socket) video output sockets for connecting to the CVBS or S-Video input sockets of a DVD recorder or VCR.

CVBS OUT

CVBS output socket for connection to a TV with a CVBS input socket.

TO TV

These output sockets are used for connecting your DFR9000 to the Scart connector of your TV, using the 6-cinch + Scart control to Scart cable.

SCART CONTROL

For inserting the 2.5mm jack. When your DFR9000 is activated, Scart control will automatically switch your TV to the correct (active) input source (provided that a Scart connection has been made).The active source will be shown on the TV screen.

VIDEO OUT

RGBS output sockets for inserting the four video cinch connectors. These sockets can also be connected to the RGB input sockets of a TV.

LINE OUT

Audio output sockets for inserting the two audio cinch connectors.

OPTICAL IN

Audio input socket for connection to the digital (optical) audio output socket of a satellite receiver.This socket can be reassigned for connection to other digital equipment

(e.g. a CD player, DVD player or CD recorder).

24M-CH IN

Audio input sockets for connection to the multichannel audio output sockets of multichannel equipment.These sockets are assigned for connection to a SACD player. If no multichannel equipment is available the L/R, SL/SR and C/SUB sockets can be reassigned for connection to analog audio equipment (CD IN, CD-R IN and AUX IN). The SBL/SBR sockets has no function when no multichannel equipment is connected.