Philips DFR9000 Technical specifications, Audio section, DTS ES Matrix, DTS ES Discrete, DTS NEO6

46 ENGLISH

	13.Technical specifications
Audio section
Power amplifier	Rated RMS output: 2 x 110 W (4 ohm, 1 kHz with 1% Total Harmonic Distortion)
	6 x 65 W (4 ohm, 1 kHz with 1% Total Harmonic Distortion)
	Dynamic power: 2 x 130 W (4 ohm)
	6 x 90 W (4 ohm)
	Maximum power: < 190 W per channel
	Signal-noise: 105 dBA
	Frequency response: 5 Hz - 45 kHz
	Ouput terminals: 4 - 8 ohm
	Total Harmonic Distortion 1 W - 1 kHz: 0.065 %
Digital output	Coaxial out according IEC 60958 & IEC 61937 / 0.5 Vpp / 75 ohm /
	PCM/Dolby Digital/DTS up to 96kHz
Digital input	Optical and coaxial in according IEC 60958 & IEC 61937 / > 0.2 Vpp / 75 ohm /
	32-96kHz, 24 bit PCM / DTS / DTS96/24 / Dolby Digital
	Multichannel formats: Dolby Prologic IIx, Dolby Digital, Dolby Digital EX, DTS, DTS 96/24,
	DTS ES Matrix, DTS ES Discrete, DTS NEO:6.
Line/Rec out	Rated output: 1.6 Vrms
	Signal-noise: 110 dBA
	Total Harmonic Distortion: 0.0016 %
	Frequency response: 5 - 100 kHz
	Input sensitivity: 0.2 - 2.8 V
	Input impedance: 22 kohm
	ADC/DAC rated output: 96 kHz / 24 bits
Analogue video section (input/output)
Composite Video	Signal level: 1 Vp-p/75 ohm
	Frequency response: 0-6 Mhz
	Signal-noise: > 50 dB
S-Video	Signal level:Y - 1 Vp-p / 75 ohm
	C - 0.286 Vp-P / 75 ohm
	Frequency response: 0 - 6.5 MHz
	Signal-noise: > 65 dB
Component Video/RGB	Signal level:
	Y - 1 Vp-p / 75 ohm
	PB/CB, PR/CR - 0.7 Vp-p / 75 ohm
	R, G, B - 0.7 Vpp / 75 ohm
	Frequency response70: 0 - 7 MHz
	Progressive: 0 - 16 MHz
	Signal-noise: > 70 dB
Input resolutions/formats	PAL: 576i (720 x 576i)
	PAL progressive: 576p (720 x 576p, downscaled to 576i)
	NTSC: 480i (720 x 480i)
	NTSC progressive: 480p (720 x 480p, downscaled to 480i)
Input resolution	PAL input 50 Hz (TV):
	- 576i (720 x 576i);
	- 576p (720 x 576p);
	- 720p (1280 x 720p);
	- 1080i (1920 x 1080i).

NTSC input 60 Hz (TV):

-480i (720 x 480i);

-480p (720 x 480p);

-720p (1280 x 720p);

-1080i (1920 x 1080i).