Blaupunkt Acapulco CD51 Automatic Sound, Adjusting the Volume of the Confirmation Tone

VOLUME ADJUSTMENT

fic announcement is not reproduced until the call or the speech output has finished.

If a call is received or if the navigation system begins speaking during a traffic announcement, the announcement is reproduced. The telephone call or speech output can be heard when the traffic announcement has finished.

The volume at which navigation output or telephone calls start is adjusted as follows:

➮Press the MENU button 8.

➮Press the button :until “TEL/ NAVI VOL” appears in the display.

➮Set the desired volume with the buttons :.

➮When the setting process is com- plete, press the MENU button 8 or OK ;.

Note:

You can adjust the volume level of tele- phone calls and of speech output as they are made with the volume control

2.

Automatic Sound

This function adjusts the volume of your car radio automatically to your driving speed. This requires your device to be connected as described in the installa- tion guide.

The automatic volume booster can be set in six stages (0-5).

➮Press the MENU button 8.

➮Press the button :until “AUTO SOUND” appears in the display.

➮Set the volume adjustment with the buttons :.

➮When the setting process is com- plete, press the MENU button 8 or OK ;.

Note:

The right speed-adjusted volume set- ting depends on noise levels inside your car.Try various values (0-5) until you find the best setting.

Adjusting the Volume of the Confirmation Tone

With certain functions, if you hold a but- ton pressed for longer than 2 seconds (e.g. when saving a station frequency on a station button) a confirmation tone (or beep) is heard.To adjust the volume level of the beep:

➮Press the MENU button 8.

➮Press the button :until “BEEP” appears in the display.

➮Set the desired volume with the buttons :.

“0” means no beep, “9” means maximum beep volume.

➮When the setting process is com- plete, press the MENU button 8 or OK ;.

ENGLISH

39