RADIO OPERATION
➮To switch between memory levels
and wavebands, briefly press the BND/TS button 5.
Setting the Station
There are a number of ways to set the station.
Automatic Station Search
➮Press the 
or 
button :.
The next station that can be received is tuned in.
Manual Station Tuning
To tune to a station manually
➮Press the 
or 
button :.
Note:
Manual station tuning is only possible when the RDS convenience function is switched off.
Browsing a chain of stations (FM only)
If a station provides several programs, it is possible to browse through this “chain” of stations.
➮Press the 
or 
button :to change to the next link in the sta- tion chain.
Note:
To use this function, the RDS conven- ience function must be active.
This means you can only switch to a station you have already received at least once. Use the Scan or Travelstore function for this purpose.
Adjusting Station Search Sensitivity
You can choose whether to search only for stations with strong signals, or wheth- er weak stations should be included.
➮Press the MENU button 8.
➮Press the 
button :until “SENS” appears in the display.
➮Press the 
button :.
The current sensitivity level appears in the display. “SENS HI6” means maxi- mum sensitivity, “SENS LO1” means minimum sensitivity. When “SENS LO” is selected, the display shows “lo”.
➮Set the desired sensitivity with the 
buttons :.
➮When the setting process is com- plete, press the MENU button 8 or OK ;.
Saving Stations
Saving a Station Manually
➮Choose between memory levels FM1, FM2, FMT or the MW and LW wavebands.
➮Tune to the station you want.
➮Choose one of the station buttons
1 - 6 >on which you want to store the station and hold it pressed for longer than 2 seconds.
ENGLISH
41
