TELEPHONE OPERATION
MAKING AND RECEIVING CALLS WITH THE HANDSET
To make a call, lift the handset, then press TALK. The IN USE indicator on the base lights. Dial the number. You see the number as you dial, then (about 5 seconds later) the call’s elapsed time.
Note: You can also dial the number be- fore you press TALK. If you make a mis- take, repeatedly press DELETE until the incorrect digit is deleted, then enter the correct number. To delete the entire number, hold down DELETE for over one second.
To answer a call, lift the handset from the base and press TALK. If auto talk is on, just lift the handset from the base, or, if the handset is away from the base, press any key to answer a call.
To end a call, place the handset on the base or press TALK.
MAKING AND RECEIVING CALLS WITH THE SPEAKERPHONE
To make or answer a call using the speakerphone, press SPEAKER. The SPEAKER indicator lights. When you hear a dial tone, dial the number.
SPEAKER
VOLUME
To set the speakerphone’s volume, slide VOLUME on the right side of the base.
To end a speakerphone call, press SPEAKER again.
ADJUSTING THE
HANDSET VOLUME
To adjust the volume of the sound you hear through the handset, during a call, press or .
The display shows Vol- ume Low, Volume Medium, Volume High, or Volume Maximum. When you press 
when the volume is maxi- mum or 
when the volume is low, the error tone sounds.
SWITCHING BETWEEN THE HANDSET AND SPEAKER
To switch to the speakerphone while you are using the handset, press SPEAKER on the base. When you hear the conversation or dial tone on the speakerphone, press TALK on the hand- set.
14
